FS2004/FSX SIERRA NEVADA PART 6: SEQUOIA NATIONAL PARK II (WEST), CALIFORNIA" SCENERY
This is the sixt part of BlueSky's Sierra Nevada project and the second part of Seqouia National Park. Connects seamlessly and extends the first part (Sequoia I) to the west. Completes the High Sierra packages and brings the total to 21.000 sq km covering three National Parks (Sequoia, Kings Canyon and Yosemite). Works equally well in FS2004 and FSX. By Gottfried Razek

  Download (93,106 Kb)
FirstClass Download CLICK HERE

FS2004/FSX MCR - 01 FS2004/FSXUltralight, France, FSX, Demoversion
The MCR Ultralight is a side by side two-seater airplane with incredible performance and capability. Fast and agile, the VLA was specially designed to reach top speed while providing the most enjoyable experience to pilots  The MCR Sportster is a very high performance aircraft, that can cruise as fast as 300 km/h with only a 100 hp engine, at very low cost. Thanks to the highest level of technology available, and very light material, the Sportster has a very efficient direct control system that guarantees the same satisfaction as flying a fighter jet. The MCR Sportster can be equipped with a choice of different power plants, but may also be fitted with other options such as : Ballistic Recovery System parachute  Extended range wing tanks. Toe operated Hydraulic brakes The MCR Sportster is available in kit form in respect with the CNSK regulation (specific kit airworthiness certificate) or in the "experimental" category depending on the registration country. ( Previewversion ) Panel, GAUGES, model, sound and textures by www.afs-design.de - Author: A.Meyer

  Download (13,738 Kb)
FirstClass Download CLICK HERE

FS2004/FSX  Spanish harriers version AV-8B Plus II And TAV-8B
The models are from Alphasim, are freeware in Alphasim´s web site. For install drop the aircraft in the aircraft folder from FS9 ,the gauges in gauges´s folder, and the effects in effects folder,it´s very easy¡¡¡ For take off in hover, see the fuel,you must to have maximun 75% for this.Flaps down and take off¡¡¡¡¡. Thanks to Rob Barendregt for yours gauges¡¡¡¡ Enjoy Flight. Idem30

  Download (27,593 Kb)
FirstClass Download CLICK HERE

FS2004/FSX Gloster Guardian Fighter
The last of the Gloster fighter designs created by H P Folland, the single-seat all-metal cantilever monoplane evolved to Specification F.5/34 (which ultimately produced the Hurricane and the Spitfire) was powered by an 840hp Mercury IX nine-cylinder radial engine and carried an armament of eight 7.7mm Browning guns. This aircraft, to which no designation was assigned other than that of the specification that it was intended to meet, suffered somewhat protracted development owing to the company's preoccupation with the Gladiator. The first of two prototypes did not commence flight trials until December 1937, with the second following in March 1938. By the time that the Gloster fighter made its debut, the Hurricane had entered service and the Spitfire had reached production, and further development of the Mercury-engined monoplane was not pursued.

  Download (12,851 Kb)
FirstClass Download CLICK HERE

FSX Terrain Mesh, Territory between N56°-N57° and W66°-W77°, Province of Quebec (Canada) in LOD10 (38m) – for FSX only
File Names: Qc38mBJ1_FSX.zip Author: Gilles Gauthier Date of Release: March 2008 Version: 1.00 FSX 38m (Lod10) terrain mesh files of territory included between N56°-N57° and W66°-W77°, province of Quebec, Canada.
Other Quebec (38m) mesh files

  Download (22,127 Kb)
FirstClass Download CLICK HERE

FSX LAKES, SHORELINES and RIVERS - PROVINCE of QUEBEC, CANADA - FSX ONLY
Territory Included between N55°-N57° and W66°-W78° File name : QCLacsBJ1_FSX Author : Gilles Gauthier Date : March 2008 Version : 1.0 Lakes, shorelines and rivers of the province of Quebec, Canada - Territory included between N55°-N57° and W66°-W78°(for FSX only). For best rendering, use terrain mesh for the same territory of the province of Quebec (Canada) in LOD10 (38m)

  Download (32,461 Kb)
FirstClass Download CLICK HERE

FS2004 Agusta Bell AB 139
 Designed by Brian Whitelegg, 03.05.05. For FS9 / 2004 only. Rotor textures by Brian ( Ack Ack ) McIntyre. Pilot figure from a David Eckert original. I-EPIC, the third prototype AB 139 in its latest corporate colours. I have fitted out the cabin in what I would see as a luxury fitment for the rich executive. Features 32 bit textures with reflective body paint, animated doors, gear and rotors. Nav/strobe lights on the "L" key. Aircraft Install...... The "Clickteam" auto installer will install the aircraft to the default FS9 directory. If your copy of FS9 is in a different location then change the target directory during the install process. The aircraft will be listed under Agusta Bell.

Download (31,593 Kb)
FirstClass Download CLICK HERE

FSX Walt Disney World 2012
Extract each off the Zip Files into the Folder as per each of the Read Me's Credits:- Ken Mitchell (Original Gauges) Rob Barendregt (Original Ground Handling Gauge)  Robert Verslus (Original A380 Mdl only)
By Steve Rathbone

  Download (29,021 Kb)
FirstClass Download CLICK HERE

FS2004 garuda indonesia boeing 777 300 ER
After gaining a marvelous profit last year garuda order this 777 and hope to fly it 2010. Full package just copy it to your aircraft folder then add panel and sound the textures includes visit indonesia symbol  De Medansche repaintforum CEO. By Riazy Aulia

  Download (6,618 Kb)
FirstClass Download CLICK HERE

FS2004 Meljet B777 ALITALIA
A repaint for Meljet B777.You must copy the entire folder B777-200 Alitalia NC in your aircraft folder.
Thanks for downloading! Federico LIRF

  Download (5,184 Kb)
FirstClass Download CLICK HERE

FSX-Scenery of German Airforce Base Wittmund in East Frisia, Northwest Germany
It is the home base of the fighter squadron 71 "Richthofen", the Northgerman part of Nato interceptor groups. They are still flying the McDonnell Douglas F-4F "Phantom II This scenery was done by SBuilderX with Google Earth and season change. Most objects by Instant Scenery are default scenery objects from the library or Rwy 12, a militray group from objects of GGSE by John Stinstrom Remark: If you have MyTraffic, safe the orignal BR2_ETNT, rename my AFX_ETNT to BR2_ETNT and put it in MyTraffic Scenery folder Hamburg/EDDH

  Download (2,679 Kb)
FirstClass Download CLICK HERE

FS2004 Eurofighter textures
Eurofighter textures
No more additional comments

  Download (3,849 Kb)
FirstClass Download CLICK HERE

FS2004 Boeing 777-200 KLM Texture set
---Important note about take-off:--- Take-off must be made at 80-90% N1 depending of the amount of fuel in the aircraft, for the best result, or use TOGA
Paint by: Jaivy Vedder

  Download (2,543 Kb)
FirstClass Download CLICK HERE

FSX Airbus A-380 for FSX
I made this panel based on some photos from the actual cockpit. I tried to remain as close as possible to the original panel, although some compromise is involved in order to make it work. I created all gauges used by this panel, except the standard gps. By Hector Molina

Download (1,783 Kb)
FirstClass Download CLICK HERE

FSX C-HUD
Simple HUD for use in small aircaft. Designed to be as minimalistic as possible and displays only "basic six" info plus engine torque (will display "0" if used in piston aircraft). No radar altitude, true airspeed, angle of attack etc. Gauge files are not packed and are easy to modify if you want to. How to install. 1.Copy CHUD-folder to Gauges-folder located in your FSX-folder. 2.Open the panel.cfg file of the aircraft you want to install the gauge into. 3.In the section [Window Titles] add new string by Yan Evstigneev

Download (104 Kb)
FirstClass Download CLICK HERE

FSX Iberia Repaint of the FSX default Airbus A321
In your Airbus_A321 directory, copy the folder texture.iberia. Copy the following into the existing aircraft.cfg for the Airbus A321 replacing X with the next number in the sequence.
File from Luis Lopez Artero luis-topgun"hotmail.com, Texture only

Download (3,306 Kb)
FirstClass Download CLICK HERE